Follow the instructions below if the LightwiseAllegro_DriverInstall has been run and the camera is not showing up in the Device Manager.

1) Zadig: replace WinUSB (v6.1.7600.16385) with libusb-win32 (v1.2.6.0)
   * Camera should now show up in Device Manager as libusb-win32 device.
2) Device Manager: Right click on LightWise camera and update driver to USB Composite Device.
   * Under Universal Serial Bus Controllers new USB Composite Device should appear with Hardware Id containing USB\VID_2978
3) Zadig: replace USB3 Vision Device (Interface 0) with libusb-win32 (v1.2.6.0)    * Under libusb-win32 devices in Device Manager camera should now show up as USB3 Vision Device (Interface 0)     * Under Universal Serial Bus Controllers should still see USB Composite Device with Hardware Id containing USB\VID_2978
4) Device Manager:  Under libusb-win32 devices in Device Manager right click on USB3 Vision Device and select update to load ucam driver.       * Under Imaging Devices in Device Manager camera should now show up as USB3 Vision compliant camera.   * Can now run UcamViewer.